Wi-Fi floppy emulator for the Amiga
FluxDrive is a floppy emulator for the Amiga, built around a single ESP32-S3. The board generates the signals the Amiga expects from a real floppy disk. Your disks come from your phone, your computer, your NAS or a USB stick.
Batch 1 is 100 mainboards. Your place is secured as soon as you have paid.
0 of 100 paid

The mainboard works fully on its own. The front panel adds a USB port for a stick full of disks, an OLED display, a rotary knob and buttons. The flex cable is included.


A 3D-printed wedge with the front tilted 25°. It clicks onto a separate base plate that clips into five vent slots in a row. No feet stick out at the front, so it also fits an A600 or A1200. The USB stick goes in the left side. The prototype has been printed; the photos below show it on an A500, A600 and A1200. The final version will be printed for batch 1.
FluxDrive works on every Amiga. In the Amiga 500 the board plugs straight onto the floppy connector on the motherboard (CN11) and takes its power from the drive connector. On the other models you connect it with a cable. No soldering.

FluxDrive works with the GTi touchscreen and the Webby dongles from Mez's GTi project: pick your disks on the touchscreen, no phone needed. They are optional; the web app does the same.
New firmware goes on over Wi-Fi, from the web app. If an update fails, the board falls back to the previous version by itself. Flashing over USB-C also works, with the web flasher in Chrome or Edge. If that does not work, hold BOOT while you plug it in.
FluxDrive started on a breadboard. Rev A now runs in my own Amiga 500, and connected externally to my Amiga 600 as DF1 and DF2. Rev B is the version for the production run, and enough people have asked for one to justify it. A run means ordering circuit boards and parts in one go, a hundred at a time. That is the step from hobby to product, and I do not want to take it with a loan.
So batch 1 works like this: you order and pay now, and with that money I order the run. You are funding the production of your own board. In return your place is secured, you can see exactly how far the batch is on this page, and you will be among the first to have a FluxDrive at home. If it ends up later than promised, you will hear so honestly and in time, with a new date. If you would rather not wait, you can cancel as long as your FluxDrive has not shipped. I want to keep it that simple.
Dimitri
| Main board | price to follow |
| Front panel with flex cable | price to follow |
| Case for the front panel | price to follow |
Sales open soon.
A Gotek is a separate drive replacement with its own display and a USB stick. FluxDrive generates the floppy signals with a single ESP32-S3 and has Wi-Fi: you pick and load disks from your phone, your NAS or the GTi touchscreen, for two drives at once. The front panel adds a stick, a display and a knob.
No. In the A500 the board plugs onto the floppy connector and takes its power from the drive cable. On other models you use a cable (see Which Amigas). Only mode 4 (FluxDrive as DF0 and your real drive as DF1) needs a wire with a clip to the DB23 port.
Yes. You choose which drive is DF0, and so which one the Amiga boots from, in the web app, on the GTi touchscreen or on the front panel.
ADF files for now (Amiga disk images, DD). Other disk formats, and other systems than the Amiga, come later. Ordinary USB sticks formatted as FAT32 with an MBR layout; exFAT, NTFS and GPT do not work.
Yes. The last disk stays in the board's memory and simply starts again after power-on. Without a home network FluxDrive raises its own Wi-Fi network for your phone. With the front panel you pick disks from the stick with no network at all.
No. They are a nice extra, but the web app does everything too.
Hardly. If an update over Wi-Fi fails, the board restores the previous version by itself. Over USB-C with the web flasher you can always flash again.
In batch 1 the mainboard is price to follow. The front panel with flex cable is + price to follow, the case + price to follow. So the complete set is price to follow. Shipping: Netherlands €4.75, other countries €12.75. All prices include VAT; nothing is added. You buy from Lefgozers, RetroShop's sales partner.
No. Batch 1 has the lowest price. Batch 2 costs more, and from batch 3 the complete set is price to follow. The price of a batch does not go down afterwards, so waiting gains you nothing.
Because the run is ordered in one go, a hundred boards at a time. Your payment funds the production of your board. In return you get a secured place, a real counter and a delivery promise: if it runs late you hear about it in time, and as long as your FluxDrive has not shipped you can cancel free of charge. Read the story under Why you pay up front.
Yes. At checkout, choose "Half now, the rest after delivery". You pay half when ordering and the other half within 14 days of your FluxDrive being delivered, via a payment link in the shipping email. Your place in the batch is just as secure.
As soon as batch 1 is full, I order the run. You receive your FluxDrive on a date still to be announced. You can see how far the batch is at the top of this page; you get an email when the run is ordered and when your parcel ships.
Then you hear it from me as soon as I know, with the reason and the new date. If you would rather not wait, you can cancel as long as your FluxDrive has not shipped; you then get your money back within 14 days.
Yes. Before delivery you can always cancel free of charge: via the link in your confirmation email or a short email. Your money is back within 14 days. After delivery you have 14 days to change your mind.
Within the EU, plus Norway, Switzerland and Iceland. Outside the EU you pay any import charges yourself. If you live elsewhere, join the Keep me posted list; shipping to more countries comes later.
Yes, you get a warranty. Questions? Email, send a WhatsApp message, or drop by the GTi project Discord (channel #fluxdrive).
Yes, later also other systems than the Amiga, with their own disk formats.
Leave your email address and you will hear when the next batch opens, or when a place frees up in batch 1. No place, no payment, just one email.
The list opens soon.
You buy FluxDrive from Lefgozers, RetroShop's sales partner. Seller details and Chamber of Commerce number are in the terms and conditions.