Adapters & cables / Other retro

Commodore 128 RGBI to VGA adapter (80-column)

Zu verkaufen Commodore 128 Neu
20,00 €
Plattform
Commodore 128
Zustand
Neu
Preisart
Festpreis
Connect the 80-column mode of your Commodore 128 to a 15 kHz VGA monitor or a scaler such as the GBS-8200. Passive, no power needed. Also works on IBM CGA and Tandy 1000. In a neat 3D-printed case.

The Commodore 128 outputs its 80-column picture as a digital RGBI signal on a DE9 connector. No modern monitor fits that. This adapter converts the signal to analogue RGB on a standard VGA connector (HD15), so you can use a 15 kHz monitor or a scaler. The conversion is fully passive with a resistor network. No power, no settings, just plug it in.

On the side there is an RCA connector for the monochrome composite picture of the C128. Handy if you want to use a second monitor, or want to view the 80-column picture on an ordinary composite monitor.

The adapter plugs straight into the RGBI port and comes in a two-part 3D-printed case. The connectors sit flush with the case and the two halves are joined with M3 screws and brass inserts.

Design: the adapter is based on the open-source "C128 Simple VGA Adapter" by Steve Gray (cbmsteve.ca).
The case is an Omegaware design of our own.

What it fits

The 80-column output of the C128 is the same signal as IBM CGA: the same pins, the same 15 kHz. That is why the adapter works on more machines than just the C128.

Works on

- Commodore 128, 128D and 128DCR (RGBI port)
- IBM PC with a CGA card and CGA-compatible clones
- Tandy 1000 series (including the 16-colour TGA mode)
- IBM PCjr, with an adapter cable to DE9
- IBM EGA cards in 200-line CGA mode
- Commodore PC clones with a CGA or AGA card in CGA mode

Does not work on

- MDA and Hercules (monochrome, 18.4 kHz)
- EGA in the high 350-line mode (64 colours, 21.8 kHz)
- Olivetti M24 and AT&T 6300 (400 lines)
- Computers with analogue RGB such as the Amiga, Atari ST, Apple IIGS and MSX. They need an ordinary cable, not an adapter.

The composite RCA output only works on the Commodore 128. On a PC with a CGA card that connector stays empty.

Please note

The adapter does not change the picture frequency. Your monitor has to accept 15 kHz. If your monitor only works at 31 kHz or higher, you need a scaler, for example a GBS-8200 or an OSSC. The adapter provides the right analogue RGB signal for it.

Specifications

- Input: DE9 male, digital RGBI (CGA-compatible), 15 kHz
- Output: HD15 female (VGA), analogue RGB with separate H and V sync

- Extra output: RCA, monochrome composite (C128 only)
- Power: none, fully passive
- Case: 3D printed, two parts, M3 screws with brass inserts

- Dimensions: approx. 46 x 31 x 23 mm, excluding connectors
- Design: open source, Steve Gray (cbmsteve.ca)

In the box

- C128 RGBI to VGA adapter in its case
- No cables included. You need a standard VGA cable, and an RCA cable if you want the composite picture.
Versand aus den Niederlanden mit PostNL, europaweit
Fragen? Schreib uns auf WhatsApp